EditAttachPrintable
r7 - 2017-06-30 - 17:15:37 - Main.ktessierYou are here: TWiki >  Deployment Web > DeploymentInstallingUpgradingAndMigrating > IBMQuickDeployer > IBMQuickDeployerSetupAndRun > IBMQuickDeployerChangeDefaultUserParameters

IBM Quick Deployer change default user parameters updated.png

Authors: ThomasPiccoli, KennethThomson, JenniferLiu, KenTessier, ClareCarty
Build basis: CLM 6.0, CLM 6.0.x, CE 6.0.x

Before you run the UrbanCode Deploy Install Applications application process, you must set the default user credentials. You can set these parameters when you run the installer by entering the values in the userCreds.properties file, which is included in the Quick Deployer package. Alternatively, you can set the parameters by running the Change Default User Parameters application process.

Once you know the user / password combinations for your system, you can permanently change the default values by following the instructions in the Modify Change Default User Parameters Defaults wiki page.

Change default user parameters

  1. Open application Rational_QD_60x and run process Change Default User Parameters on the target environment.

    run process

  2. If you fixed the component versions on the process you will not be prompted to choose versions. If offered to choose the component versions, then select Latest Available.

    select Latest Available

  3. Modify the process property default values to match your System.

    DB2 username restrictions / rules are highlighted below, make sure you follow these rules when specifying all of the DB2 user names:
  • Windows: Must be uppercase or lowercase letters (A-Za-z), numbers (0-9), and the underscore character.
    Linux: Must be lowercase letters (a-z), numbers (0-9), and the underscore character.
  • Must not start with a number or underscore
  • Windows: Cannot be longer than 30 characters.
    Linux: Cannot be longer than eight characters.
  • Cannot begin with IBM, SYS, SQL, or a number
  • Cannot be USERS, ADMINS, GUESTS, PUBLIC or LOCAL


A full up to date set of restrictions can be found in the Installing DB2 Servers topic at IBM Knowledge Center: DB2 for Linux UNIX and Windows

The properties are as follows

    • mediaUser : user that accesses an http media server
      Default : not used
    • mediaPassword : password for mediaUser
      Default : not used
    • IHSServerKeyStorePassword : - password for the IHS certificate keystore
      Default : ihspassword
    • DB2InstanceUser : this is the DB2 instance user (several databases are stored in an instance)
      Default : db2inst1 (linux) db2admin (Windows)
    • DB2InstancePassword : password for DB2InstanceUser
      Default : db2password
    • DB2InstanceUserGroup : group to contain the DB2InstanceUser (will be created)
      Default : db2iadm1 (linux) DB2ADMNS (Windows)
    • DB2DASUser : this is the DB2 administration server user (refer to DB2InstanceUser rules)
      Default : dasusr1 (linux) db2admin (Windows)
    • DB2DASUserGroup : group to contain the DB2DASUser (will be created)
      Default : dasadm1 (linux) DB2ADMNS (Windows)
    • DB2FenceUser : this is the DB2 fenced user (refer to DB2InstanceUser rules) (not required on Windows)
      Default : db2fenc1
    • DB2FenceUserGroup : group to contain the DB2FenceUser (will be created) (not required on Windows)
      Default : db2fadm1
    • OSUserName : user used to install and run IM, WAS, IHS & jazzApps
      Default : osusername
    • OSUserGroup : group to contain the OSUserName
      Default : osusergroup
    • OSUserPassword : password for OSUserName
      Default : osuserpassword
    • oracleOSUserName : this is the os user that will run Oracle database
      Default : orauser
    • oracleOSUserPassword : the oracle user's password
      Default : oraclePassword
    • oracleOSUserPrimaryGroup : the primary group for the oracle OS user (not required on Windows)
      Default : oinstall
    • oracleOSUserAdditionalGroup : the additional group for oracle OS user (not required on Windows)
      Default : dba
    • oracleALLPassword : the password that is to be used for all schemas in the starter database
      Default : oracleALLPassword
    • oracleSYSPassword : the SYS password for the starter database
      Default : oracleSYSPassword
    • oracleSYSTEMPassword : the SYSTEM password for the starter database
      Default : oracleSYSTEMPassword
    • oracleDBSNMPPassword : the DBSNMP password for the starter database
      Default : oracleDBSNMPPassword
    • oraclePDBADMINPassword : the PDBADMIN password required for the creation of a Pluggable Database in the Container Database if a Pluggable database is created
      Default : oraclePDBADMINPassword
    • oracleDBUsersPassword : the password for all database users (e.g. user is jtsUser)
      Default : oracleDBUsersPassword

  1. Click on Submit and wait for the process to run to completion

    wait for completion

Miscellaneous

Notes:

  • Throughout the IBM Quick Deployer wiki the screen captures are for reference only.
    In some cases if the functionality they display has not changed in the latest release they will be from a previous release

Related topics:

External links:

Additional contributors: MichelleCrane, NathanBak, ChristianLopez

Edit | Attach | Printable | Raw View | Backlinks: Web, All Webs | History: r10 < r9 < r8 < r7 < r6 | More topic actions...
Deployment.IBMQuickDeployerChangeDefaultUserParametersV20 moved from Deployment.IBMQuickDeployerChangeDefaultUserParametersV14 on 2017-05-24 - 13:54 by Main.ktessier
 
This site is powered by the TWiki collaboration platformCopyright © by IBM and non-IBM contributing authors. All material on this collaboration platform is the property of the contributing authors.
Contributions are governed by our Terms of Use. Please read the following disclaimer.
Dashboards and work items are no longer publicly available, so some links may be invalid. We now provide similar information through other means. Learn more here.