Money that Matters sample Build

Changing my terminal command from /jts to /ccm fixed it. Thanks!

Actually I think your installation is broken, /jts is not the right path
for the build engine, I think it must be /ccm. I suggest to recreate
from a fresh install.

On 01.08.2011 2:53, jainan wrote:

The problem I have is that when I'm trying to build the JKE Project
within RTC, not building the sample. Still haven't figured out why
I'm getting the error (see above posts) and how I can get it to
work.

rstephrrwrote:
Any resolution?
FYI...
I know that initially I created the MTM sample w/o the proper
license and got a "partial" install. I deleted the project
to reinstall and found that deleting isn't good. I recovered by
following this advice on the resulting error message when I tried to
create again.
"Server Response:

The sample can only be created once on a server. Use the Projects
page to navigate to the existing sample. If you want to create the
sample a second time, first rename and
archive all artifact containers associated with the
sample lifecycle project then delete the lifecycle
project from the Projects page. Once these changes are completed, you
will be able to create the sample again."
To archive, you need to go to each product's project management
(CCM, QM, RC) and archive it. After you have the proper lic (Quality
Professional and Build) you shouldn't have trouble recreating the MTM
sample.
rns

Actually I think your installation is broken, /jts is not the right path
for the build engine, I think it must be /ccm. I suggest to recreate
from a fresh install.

On 01.08.2011 2:53, jainan wrote:

The problem I have is that when I'm trying to build the JKE Project
within RTC, not building the sample. Still haven't figured out why
I'm getting the error (see above posts) and how I can get it to
work.

rstephrrwrote:
Any resolution?
FYI...
I know that initially I created the MTM sample w/o the proper
license and got a "partial" install. I deleted the project
to reinstall and found that deleting isn't good. I recovered by
following this advice on the resulting error message when I tried to
create again.
"Server Response:

The sample can only be created once on a server. Use the Projects
page to navigate to the existing sample. If you want to create the
sample a second time, first rename and
archive all artifact containers associated with the
sample lifecycle project then delete the lifecycle
project from the Projects page. Once these changes are completed, you
will be able to create the sample again."
To archive, you need to go to each product's project management
(CCM, QM, RC) and archive it. After you have the proper lic (Quality
Professional and Build) you shouldn't have trouble recreating the MTM
sample.
rns

Ok, btw https://jazz.net/wiki/bin/view/Main/MTM_Lifecycle_Configure
explains how to set the environment up properly.

Ben

On 02.08.2011 10:08, jainan wrote:

Changing my terminal command from /jts to /ccm fixed it. Thanks!

bpaserowrote:
Actually I think your installation is broken, /jts is not the right
path
for the build engine, I think it must be /ccm. I suggest to recreate
from a fresh install.

On 01.08.2011 2:53, jainan wrote:
The problem I have is that when I'm trying to build the JKE Project
within RTC, not building the sample. Still haven't figured out why
I'm getting the error (see above posts) and how I can get it to
work.

rstephrrwrote:
Any resolution?
FYI...
I know that initially I created the MTM sample w/o the proper
license and got a "partial" install. I deleted the
project
to reinstall and found that deleting isn't good. I recovered by
following this advice on the resulting error message when I tried
to
create again.
"Server Response:

The sample can only be created once on a server. Use the Projects
page to navigate to the existing sample. If you want to create the
sample a second time, first rename and
archive all artifact containers associated with the
sample lifecycle project then delete the lifecycle
project from the Projects page. Once these changes are completed,
you
will be able to create the sample again."
To archive, you need to go to each product's project management
(CCM, QM, RC) and archive it. After you have the proper lic
(Quality
Professional and Build) you shouldn't have trouble recreating the
MTM
sample.
rns

Make sure the user "build" has a license (Build License) setup.

On 21.07.2011 3:53, jainan wrote:

I installed the Money That Matters sample on my Jazz Server and have
tried running the build:

$ sudo /opt/TeamConcertBuild/buildsystem/buildengine/eclipse/jde
-repository https://localhost:9443/jts -userID build -pass build
-engineID jke.dev.engine -sleepTime 3

The build engine apparently starts up. The console looks like this:

2011-07-21 06:34:21 Running build loop...
2011-07-21 06:34:21 Waiting for request...
2011-07-21 06:35:04 CRRTC3524W: Repository
connection failed: CRJAZ0106I The request for the URL
"/jts/service/com.ibm.team.build.internal.common.ITeamBuildService"
was denied. The status is Not Available".

I know my server is running because I can access the web client, and
any configuration was done with the preconfigured MTM Sample.
Thoughts?

While I did forget to assign the build license on this iteration, that hasn't resolved the error I'm receiving.

Make sure the user "build" has a license (Build License) setup.

On 21.07.2011 3:53, jainan wrote:

I installed the Money That Matters sample on my Jazz Server and have
tried running the build:

$ sudo /opt/TeamConcertBuild/buildsystem/buildengine/eclipse/jde
-repository https://localhost:9443/jts -userID build -pass build
-engineID jke.dev.engine -sleepTime 3

The build engine apparently starts up. The console looks like this:

2011-07-21 06:34:21 Running build loop...
2011-07-21 06:34:21 Waiting for request...
2011-07-21 06:35:04 CRRTC3524W: Repository
connection failed: CRJAZ0106I The request for the URL
"/jts/service/com.ibm.team.build.internal.common.ITeamBuildService"
was denied. The status is Not Available".

I know my server is running because I can access the web client, and
any configuration was done with the preconfigured MTM Sample.
Thoughts?

Any resolution?

FYI...
I know that initially I created the MTM sample w/o the proper license and got a "partial" install. I deleted the project to reinstall and found that deleting isn't good. I recovered by following this advice on the resulting error message when I tried to create again.

"Server Response:

The sample can only be created once on a server. Use the Projects page to navigate to the existing sample. If you want to create the sample a second time, first rename and archive all artifact containers associated with the sample lifecycle project then delete the lifecycle project from the Projects page. Once these changes are completed, you will be able to create the sample again."

To archive, you need to go to each product's project management (CCM, QM, RC) and archive it. After you have the proper lic (Quality Professional and Build) you shouldn't have trouble recreating the MTM sample.

rns

The problem I have is that when I'm trying to build the JKE Project within RTC, not building the sample. Still haven't figured out why I'm getting the error (see above posts) and how I can get it to work.

Any resolution?

FYI...
I know that initially I created the MTM sample w/o the proper license and got a "partial" install. I deleted the project to reinstall and found that deleting isn't good. I recovered by following this advice on the resulting error message when I tried to create again.

"Server Response:

The sample can only be created once on a server. Use the Projects page to navigate to the existing sample. If you want to create the sample a second time, first rename and archive all artifact containers associated with the sample lifecycle project then delete the lifecycle project from the Projects page. Once these changes are completed, you will be able to create the sample again."

To archive, you need to go to each product's project management (CCM, QM, RC) and archive it. After you have the proper lic (Quality Professional and Build) you shouldn't have trouble recreating the MTM sample.

rns

This one lonely answer solved my CRRTC3524W and CRJAZ0106E woes!  All the docs say point to -repository https://myjazzteamserver/jts and all along it was https://myjazzteamserver/ccm. 

Thank you!!!!

Thanks, changing context root from jts to ccm fixed my issue.