combining rtc 3.0 and rrc 2.2 on same server

Is it possible to combine rtc3.0 and rrc2.x on the same server? If so, is there a white paper like the one below that was written for 2.x and 2.x

It is possible to combine rtc 2.x and rrc 2.x on the same server (http://www-01.ibm.com/support/docview.wss?uid=swg27017317)

Hi Jim

You can certainly install RTC 3 and RRC 2 on the same physical server (I have that on my laptop right now). However, I am not running these products at the same time, or trying to integrate them.

Not much help (sorry), but perhaps a starting point for you.

anthony

Is it possible to combine rtc3.0 and rrc2.x on the same server? If so, is there a white paper like the one below that was written for 2.x and 2.x

It is possible to combine rtc 2.x and rrc 2.x on the same server (http://www-01.ibm.com/support/docview.wss?uid=swg27017317)

Hi Jim

You can certainly install RTC 3 and RRC 2 on the same physical server (I have that on my laptop right now). However, I am not running these products at the same time, or trying to integrate them.

Not much help (sorry), but perhaps a starting point for you.

anthony

RTC V3 and RRC V2 are using different jazz server components so unlike with V2 they cannot be installed in the same jazz server instance. Separate servers can be installed (with different port numbers) and run on the same physical machine.

With RRC V3 (M12) milestone release once again they can all be installed on the same jazz instance, as the same jazz components are used by all applications. Obviously M12 should only be used in a test environment and not production.

Installing V3 applications on the same jazz server instance is part of the jazz setup.

Is it possible to combine rtc3.0 and rrc2.x on the same server? If so, is there a white paper like the one below that was written for 2.x and 2.x

It is possible to combine rtc 2.x and rrc 2.x on the same server (http://www-01.ibm.com/support/docview.wss?uid=swg27017317)

Hi Jim

You can certainly install RTC 3 and RRC 2 on the same physical server (I have that on my laptop right now). However, I am not running these products at the same time, or trying to integrate them.

Not much help (sorry), but perhaps a starting point for you.

anthony

RTC V3 and RRC V2 are using different jazz server components so unlike with V2 they cannot be installed in the same jazz server instance. Separate servers can be installed (with different port numbers) and run on the same physical machine.

With RRC V3 (M12) milestone release once again they can all be installed on the same jazz instance, as the same jazz components are used by all applications. Obviously M12 should only be used in a test environment and not production.

Installing V3 applications on the same jazz server instance is part of the jazz setup.

Which file do I need to change the port in - besides server.xml - so that RTC 3.0 and RRC can coexist on the same server ?
Thanks.

Is it possible to combine rtc3.0 and rrc2.x on the same server? If so, is there a white paper like the one below that was written for 2.x and 2.x

It is possible to combine rtc 2.x and rrc 2.x on the same server (http://www-01.ibm.com/support/docview.wss?uid=swg27017317)

Hi Jim

You can certainly install RTC 3 and RRC 2 on the same physical server (I have that on my laptop right now). However, I am not running these products at the same time, or trying to integrate them.

Not much help (sorry), but perhaps a starting point for you.

anthony

RTC V3 and RRC V2 are using different jazz server components so unlike with V2 they cannot be installed in the same jazz server instance. Separate servers can be installed (with different port numbers) and run on the same physical machine.

With RRC V3 (M12) milestone release once again they can all be installed on the same jazz instance, as the same jazz components are used by all applications. Obviously M12 should only be used in a test environment and not production.

Installing V3 applications on the same jazz server instance is part of the jazz setup.

Which file do I need to change the port in - besides server.xml - so that RTC 3.0 and RRC can coexist on the same server ?
Thanks.

Found it: http://www-01.ibm.com/support/docview.wss?rs=203&context=SW000&dc=DA410&dc=DA450&dc=DA430&dc=DA440&dc=D600&dc=D700&dc=DB510&dc=DB520&dc=D800&dc=D900&dc=DA900&dc=DA800&dc=DB540&dc=DB400&dc=DB560&dc=DB530&dc=DA600&dc=DA420&dc=DA460&dc=DA470&dc=DA480&dc=DA4A10&dc=DA4A20&dc=DA4A30&dc=DA400&dc=DA500&dc=DB700&dc=DB600&dc=DB550&q1=1410385&uid=swg21410385&loc=en_US&cs=UTF-8&lang=all

I followed the instructions listed about RTC and RRC2 and changed ports as suggested and I am not sure how to keep the tomcat window open or where the log is but I see that when it tries something on port 9444 I see three failure lines before the window closes and cannot read everything. Where can I find the log file or keep the tomcast window from closing so I can fix this and run both on the same machine?