CQ outbound sync error
Getting this error during outbound synchronization to CQ. Any idea?
Error occurred: java.lang.RuntimeException: com.ibm.team.interop.service.managers.clearquest.common.InteropException: com.ibm.team.interop.service.managers.clearquest.common.InteropException: Property 'requiredness' not requested. |
8 answers
|
Also, in the property mapping dialog, there is the Advanced tab where you can specify required item and external properties using checkboxes. What is this for? I tried selecting the checkboxes but the selection goes away even after I click OK and come back in.
|
Getting this error during outbound synchronization to CQ. Any idea? Just a guess at this point: you recently added a mapping for the record_type property, right? If so, check whether the "Synchronize outgoing" option is checked for that mapping - if so, uncheck it. You can't set the record type of a CQ record; it is a read-only property. This error may have something to do with trying to set a read-only field. John ClearQuest Connector Team |
Also, in the property mapping dialog, there is the Advanced tab where you can specify required item and external properties using checkboxes. What is this for? I tried selecting the checkboxes but the selection goes away even after I click OK and come back in. The Advanced tab is used to declare that the computation of a property depends on the values of other properties (so they must be computed first). It is only used if a particular value transformer has such dependencies. At this point, only WorkflowActionValueTransformer has any dependencies - the JazzWorkFlowAction property depends on the StateResolution property. You normally wouldn't use this - it's only if there are ambiguous state transitions in your Jazz work flow (i.e. more than one action transitions between the same two states). John ClearQuest Connector Team |
|
John,
I did have outgoing sync flag checked for the record type rule. I unchecked it and restarted all services but still get the requiredness error. I actually also cutdown the nunber of outgoing sync to a bare minimum (see XML at the end) but still have error. The complete dump on the gateway screen is: 'requiredness' property-not-requested: Property 'requiredness' not requested. at com.ibm.rational.stp.cs.internal.util.StpPropertyExceptionImpl.realEx ception(StpPropertyExceptionImpl.java:138) at com.ibm.rational.stp.cs.internal.util.StpExceptionImpl.<init>(StpExce ptionImpl.java:496) at com.ibm.rational.stp.cs.internal.util.StpPropertyExceptionImpl.<init> (StpPropertyExceptionImpl.java:76) at com.ibm.rational.stp.cs.internal.util.StpPropertyExceptionImpl.<init> (StpPropertyExceptionImpl.java:64) at com.ibm.rational.stp.cs.internal.protocol.PropMap.newNotRequestedExce ption(PropMap.java:127) at com.ibm.rational.stp.cs.internal.protocol.PropMap.valueOf(PropMap.jav a:81) at com.ibm.rational.stp.cs.internal.protocol.Property.getMetaProperty(Pr operty.java:138) at com.ibm.rational.stp.client.internal.cq.FieldValue.getMetaProperty(Fi eldValue.java:994) at com.ibm.rational.stp.cs.internal.protocol.Property.getMetaProperty(Pr operty.java:119) at com.ibm.rational.stp.client.internal.cq.FieldValue.getRequiredness(Fi eldValue.java:124) at com.ibm.rational.connector.cq.common.cqgateway.internal.CqRecordForIn terop.readOnly(CqRecordForInterop.java:152) at com.ibm.rational.connector.cq.common.cqgateway.internal.CqRecordForIn terop.setObjectState(CqRecordForInterop.java:346) at com.ibm.rational.connector.cq.common.cqgateway.CQInteropEventHandler. handleUpdateEvent(CQInteropEventHandler.java:385) at com.ibm.rational.connector.cq.common.cqgateway.CQGateway.update(CQGat eway.java:156) at com.ibm.rational.connector.cq.gateway.servlet.InteropOperationInvoker .invoke(InteropOperationInvoker.java:53) at com.ibm.rational.connector.cq.gateway.servlet.InteropServlet.doPostIn teropOperation(InteropServlet.java:57) at com.ibm.rational.connector.cq.gateway.servlet.InteropServlet.doPost(I nteropServlet.java:202) at javax.servlet.http.HttpServlet.service(HttpServlet.java:709) at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl icationFilterChain.java:252) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF ilterChain.java:173) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV alve.java:213) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV alve.java:178) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j ava:126) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j ava:105) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal ve.java:107) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.jav a:148) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java :869) at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.p rocessConnection(Http11BaseProtocol.java:664) at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpo int.java:527) at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFol lowerWorkerThread.java:80) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP ool.java:684) at java.lang.Thread.run(Thread.java:801) Got an InteropException: Property 'requiredness' not requested. 'requiredness' property-not-requested: Property 'requiredness' not requested. at com.ibm.rational.stp.cs.internal.util.StpPropertyExceptionImpl.realEx ception(StpPropertyExceptionImpl.java:138) at com.ibm.rational.stp.cs.internal.util.StpExceptionImpl.<init>(StpExce ptionImpl.java:496) at com.ibm.rational.stp.cs.internal.util.StpPropertyExceptionImpl.<init> (StpPropertyExceptionImpl.java:76) at com.ibm.rational.stp.cs.internal.util.StpPropertyExceptionImpl.<init> (StpPropertyExceptionImpl.java:64) at com.ibm.rational.stp.cs.internal.protocol.PropMap.newNotRequestedExce ption(PropMap.java:127) at com.ibm.rational.stp.cs.internal.protocol.PropMap.valueOf(PropMap.jav a:81) at com.ibm.rational.stp.cs.internal.protocol.Property.getMetaProperty(Pr operty.java:138) at com.ibm.rational.stp.client.internal.cq.FieldValue.getMetaProperty(Fi eldValue.java:994) at com.ibm.rational.stp.cs.internal.protocol.Property.getMetaProperty(Pr operty.java:119) at com.ibm.rational.stp.client.internal.cq.FieldValue.getRequiredness(Fi eldValue.java:124) at com.ibm.rational.connector.cq.common.cqgateway.internal.CqRecordForIn terop.readOnly(CqRecordForInterop.java:152) at com.ibm.rational.connector.cq.common.cqgateway.internal.CqRecordForIn terop.setObjectState(CqRecordForInterop.java:346) at com.ibm.rational.connector.cq.common.cqgateway.CQInteropEventHandler. handleUpdateEvent(CQInteropEventHandler.java:385) at com.ibm.rational.connector.cq.common.cqgateway.CQGateway.update(CQGat eway.java:156) at com.ibm.rational.connector.cq.gateway.servlet.InteropOperationInvoker .invoke(InteropOperationInvoker.java:53) at com.ibm.rational.connector.cq.gateway.servlet.InteropServlet.doPostIn teropOperation(InteropServlet.java:57) at com.ibm.rational.connector.cq.gateway.servlet.InteropServlet.doPost(I nteropServlet.java:202) at javax.servlet.http.HttpServlet.service(HttpServlet.java:709) at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl icationFilterChain.java:252) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF ilterChain.java:173) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV alve.java:213) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV alve.java:178) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j ava:126) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j ava:105) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal ve.java:107) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.jav a:148) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java :869) at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.p rocessConnection(Http11BaseProtocol.java:664) at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpo int.java:527) at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFol lowerWorkerThread.java:80) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP ool.java:684) at java.lang.Thread.run(Thread.java:801) Got an InteropException: Property 'requiredness' not requested. Sync rule <?xml version="1.0" encoding="UTF-8"?> <syncRule> <name>com.accenture.clearquest.IDC70.ADT_Defect</name> <externalTypeName>com.ibm.rational.clearquest.IDC70.ADT_Defect</externalTypeName> <syncItemTypeName>WorkItem</syncItemTypeName> <syncItemTypeNsURI>com.ibm.team.workitem</syncItemTypeNsURI> <itemManager>com.ibm.team.interop.service.managers.workitem.WorkItemManager</itemManager> <externalManager>com.ibm.team.interop.service.managers.clearquest.CQExternalManagerForUser</externalManager> <maxCycleCount>10</maxCycleCount> <syncAllItemStates>true</syncAllItemStates> <propertyMappings> <propertyMapping> <externalPropertyName>Adt_Project_Name</externalPropertyName> <itemPropertyName>Category</itemPropertyName> <incoming>true</incoming> <outgoing>false</outgoing> <itemIdentifier>false</itemIdentifier> <externalIdentifier>false</externalIdentifier> <externalModifier>false</externalModifier> <requiredItemProperties></requiredItemProperties> <requiredExternalProperties></requiredExternalProperties> <transformExtension>com.ibm.team.interop.service.managers.workitem.CategoryValueTransformer</transformExtension> <referenceSyncRule>com.accenture.clearquest.IDC70.ADT_Defect</referenceSyncRule> <valueMappings> <valueMapping> <externalValue>adtarch_test</externalValue> <itemValue>adtarch_test</itemValue> <defaultExternalValue>false</defaultExternalValue> <defaultItemValue>false</defaultItemValue> </valueMapping> </valueMappings> </propertyMapping> <propertyMapping> <externalPropertyName>Adt_Description</externalPropertyName> <itemPropertyName>Description</itemPropertyName> <incoming>true</incoming> <outgoing>false</outgoing> <itemIdentifier>false</itemIdentifier> <externalIdentifier>false</externalIdentifier> <externalModifier>false</externalModifier> <requiredItemProperties></requiredItemProperties> <requiredExternalProperties></requiredExternalProperties> </propertyMapping> <propertyMapping> <externalPropertyName>Owner</externalPropertyName> <itemPropertyName>Owner</itemPropertyName> <incoming>true</incoming> <outgoing>false</outgoing> <itemIdentifier>false</itemIdentifier> <externalIdentifier>false</externalIdentifier> <externalModifier>false</externalModifier> <requiredItemProperties></requiredItemProperties> <requiredExternalProperties></requiredExternalProperties> <referenceSyncRule>com.accenture.clearquest.IDC70.users</referenceSyncRule> </propertyMapping> <propertyMapping> <externalPropertyName>Adt_Defect_Priority</externalPropertyName> <itemPropertyName>Priority</itemPropertyName> <incoming>true</incoming> <outgoing>true</outgoing> <itemIdentifier>false</itemIdentifier> <externalIdentifier>false</externalIdentifier> <externalModifier>false</externalModifier> <requiredItemProperties></requiredItemProperties> <requiredExternalProperties></requiredExternalProperties> <valueMappings> <valueMapping> <externalValue>1 - Critical</externalValue> <itemValue>High</itemValue> <defaultExternalValue>false</defaultExternalValue> <defaultItemValue>false</defaultItemValue> </valueMapping> <valueMapping> <externalValue>2 - High</externalValue> <itemValue>High</itemValue> <defaultExternalValue>false</defaultExternalValue> <defaultItemValue>false</defaultItemValue> </valueMapping> <valueMapping> <externalValue>3 - Medium</externalValue> <itemValue>Medium</itemValue> <defaultExternalValue>false</defaultExternalValue> <defaultItemValue>false</defaultItemValue> </valueMapping> <valueMapping> <externalValue>4 - Low</externalValue> <itemValue>Low</itemValue> <defaultExternalValue>false</defaultExternalValue> <defaultItemValue>false</defaultItemValue> </valueMapping> </valueMappings> </propertyMapping> <propertyMapping> <externalPropertyName>Headline</externalPropertyName> <itemPropertyName>Summary</itemPropertyName> <incoming>true</incoming> <outgoing>true</outgoing> <itemIdentifier>false</itemIdentifier> <externalIdentifier>false</externalIdentifier> <externalModifier>false</externalModifier> <requiredItemProperties></requiredItemProperties> <requiredExternalProperties></requiredExternalProperties> </propertyMapping> <propertyMapping> <externalPropertyName>id</externalPropertyName> <itemPropertyName>Tags</itemPropertyName> <incoming>true</incoming> <outgoing>false</outgoing> <itemIdentifier>false</itemIdentifier> <externalIdentifier>true</externalIdentifier> <externalModifier>false</externalModifier> <requiredItemProperties></requiredItemProperties> <requiredExternalProperties></requiredExternalProperties> </propertyMapping> <propertyMapping> <externalPropertyName>record_type</externalPropertyName> <itemPropertyName>Type</itemPropertyName> <incoming>true</incoming> <outgoing>false</outgoing> <itemIdentifier>false</itemIdentifier> <externalIdentifier>false</externalIdentifier> <externalModifier>false</externalModifier> <requiredItemProperties></requiredItemProperties> <requiredExternalProperties></requiredExternalProperties> </propertyMapping> </propertyMappings> </syncRule> |
|
I removed the record type mapping and it works. Crap. I need the record type mapping though. HELP!!!!
|
|
Gary, we'll track this issue in this work item:
https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/42201 John ClearQuest Connector Team I removed the record type mapping and it works. *. I need the record type mapping though. HELP!!!! |
We've got the following error when trying the sync from RTC to CQ:
java.lang.RuntimeException: com.ibm.team.interop.service.managers.clearquest.common.InteropException: CRRTC4603E And it says something like the fields in the ClearQuest might have dependencies and they might end up reference each other in a loop. It also prints out a bunch of CQ fileds affected. I learn from RTC doc that I should modify the cqconnector.properties and add "cq.orderedProperties.record-type = field1, field2....". I tried and didn't work out Did I do something wrong. What I did is just to put the bunch of CQ fileds contained in the error message in order and set them to "cq.orderedProperties.record-type". Is this right? Thanks. |
We've got the following error when trying the sync from RTC to CQ: Ideally, you should investigate the listed fields in the CQ designer. Their web dependencies are circular, which is probably not what was wanted. I learn from RTC doc that I should modify the cqconnector.properties and add "cq.orderedProperties.record-type = field1, field2....". I tried and didn't work out If for some reason, you can't fix the CQ web dependencies, this property in the cqconnector.properties file enables you specify the order explicitly. For the record type you need to specify the order in which all of the fields should be assigned, |
Your answer
Dashboards and work items are no longer publicly available, so some links may be invalid. We now provide similar information through other means. Learn more here.